Network Camera User Manual
108
Scene Change Detection
2.
Check the checkbox of
Enable
to enable the function.
3.
Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4.
Click
Arming Schedule
to set the arming schedule. Refer to
Task 2 Set the Arming
Schedule for Motion Detection
in
Section 10.1.1
for detailed steps
.
5.
Click
Linkage Method
to select the linkage methods for scene change, including
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS,
Trigger Channel and Trigger Alarm Output.
6.
Click
Save
to save the settings.
Configuring Face Detection
Purpose:
Face detection function detects the face appears in the surveillance scene, and some
certain actions can be taken when the alarm is triggered.
Steps:
Summary of Contents for MicroView MVIB-04IR-E
