OSD Setup Manual
www.ernitec.com
36
Max Rec PPS
This item will be automatically changed according to the setting of the
previous two items.
After the Record Mode settings are changed and the ESC is pressed to return to the
previous menu, a warning message will be shown as below. Press ENTER to confirm the
selection, or press ESC to abort.
!!Warning!!
System will reboot
Because of different record mode
ENTER: Yes ESC: No
NOTE:
It is strongly recommended to backup the programmed configuration before
making any changes on Record Mode settings.
<Schedule Setup>
This submenu is used to set the day and night time, or weekend recording schedule. The
Day and Night schedules are used to define daytime and nighttime; the Weekend schedule
can be modified for weekends and holidays.
Select <Schedule Setup> from the Record Setup menu and press ENTER; the following
menu is displayed.
Schedule Setup
Day Time Start
Day Time End
Night Time Start
Night Time End
Weekend Schedule
Weekend Start
Weekend End
AM 06:00
PM 18:00
AM 06:00
PM 18:00
ON
Fri 18:00
Mon 06:00
Day
/ Night Time Start
The <Day / Night Time Start> determines the beginning of day/ night recording time.
The time is indicated in 1-minute increments. The time display format in this menu
is based on the setting of <Time Display Mode> in <Date/Time> menu.
Day
/ Night Time End
The <Day / Night Time End> determines the end point of day/ night recording time.
The time is indicated in 1-minute increments. The time display format in this menu
is based on the setting of <Time Display Mode> in <Date/Time> menu.
