OSD Setup Manual
www.ernitec.com
24
-
Submit/ Update
When it’s done, move the cursor to this item and press ENTER to submit
the settings.
NOTE:
If more than one
ERIS H.264 DVR
has the same domain
name, only the first one will be submitted successfully.
-
ezDDNS
ezDDNS
enables the users to register for host name automatically.
Press ENTER and select <Yes>. The following screen will be displayed:
ezDDNS Submit/update ok!
Host name is XXXX_XXXXXX
Press any key to return
NOTE:
The DVR must be connected to the *Real IP address, or
be assigned a specific port using **Port Forwarding technique.
*
A "
Real IP
" is an IP address that is assigned to users by the ISP.
**A "Virtual IP" is an IP address assigned either manually or
through DHCP. When users are assigned a Virtual IP, users must
use
Port Forwarding
technique to assign a specific port to DVR.
<RS485 Setup>
This menu allows users to setup the parameters of the unit’s RS-485 communication port.
From System Setup, select <RS485 Setup> and press ENTER. The following menu is
displayed.
RS485 Setup
Unit ID
Baud Rate
Bits
Stop
Parity
224
9600
8
1
None
Unit ID
This item is used to change the RS-485 ID address of the unit. The ID is in the
range of <1> to <255>. The default is <224>.
Baud Rate
The Baud rate options for associated with the protocol are <2400>, <4800>,
<9600>, <19200>, <38400>, and <57600>. The default is <9600> baud.
