OSD Setup Manual
www.ernitec.com
18
-
DHCP
This item allows users to obtain a dynamic IP address from DHCP
(Dynamic Host Configuration Protocol) server when the unit boots up.
When using DHCP, the settings are dynamic and will change every time
the unit power on or off, depending on the network's setup.
If the item is enabled (ON), a dynamic IP will be assigned to
ERIS H.264
DVR
. In this case, users do not need to set a static IP and the Ethernet
settings, including IP address, Netmask, Gateway, and DNS settings will
be read-only.
The default setting is <ON>.
If the unit is using a permanent address, disable DHCP (OFF) to
manually set IP Address, Netmask, Gateway, and DNS. See the network
system administrators or IT personnel for appropriate values.
-
IP
This item is used to configure the IP (Internet Protocol) address of the
unit. The IP address is the identifier for the unit on a TCP/IP LAN. Please
note that to set a static IP address, DHCP must be set to <OFF>.
-
Netmask
This item allows users to enter the value of the Netmask for the unit.
Please note that to configure this item, DHCP must be set to <OFF>.
-
Gateway
