OSD Setup Manual
www.ernitec.com
12
MAC Address 1
This item identifies the first Media Access Control (MAC) address of the unit.
Software Upgrade via Local Device
This item is used for updating software of the
ERIS H.264 DVR
via local device.
The menu is displayed as follows.
Software Upgrade via Local Device
Upgrade Version
xxxx-xxxx-xxxx-xxxx
Select
No
Connect an USB storage device containing upgrade software to the unit; the
available upgrade files will be listed in the menu. To update the system, select a file
and use UP / DOWN keys to choose <Yes>. Press ENTER to confirm the selection
and start the upgrade process. The
ERIS H.264 DVR
will download the software,
update the system files, and reboot automatically.
The upgrade may take several minutes to save the changes in the memory of the
system. After the unit is rebooted, please check the software version again.
NOTE:
Power interruption is
NOT
allowed during the software update.
Ensure that no power interruption can occur until the unit is completely
rebooted.
NOTE:
Do not remove the external USB ThumbDrive
®
/ DVD+RW before
the unit has completely shutdown (hard drive and fan are off). Removing
the external USB ThumbDrive
®
/ DVD+RW before shutdown can cause the
system to update improperly.
<Language>
The Language item allows users to select the language for the OSD menu and screen
messages. Language selection takes effect immediately when the selection is made. Press
UP / DOWN to select from listed languages and press ENTER to confirm.
