Keyboard 1502M/1503M Set-up
In order to start programming press the
ESC
and
MENU
keys at the same time and enter the
password (4 digits). The default password is 0000.
In order to exit programming press the ESC key, and the keyboard will automatically be
re-booted in order to activate the new setting(s).
Default settings
The main default settings are factory programmed as follows:
Keyboard type: System keyboard
Communication: ARC NET
Address : 4
Baud rate: 312,50 Kbs
Password: 0000
Change keyboard type
Press the key
F4
to toggle between
SysKbd
or
CamCrtl
.
Change communication media
Press the key
F6
to toggle between
ARC NET
-
RS232
-
RS485
Set baud rate
Press the
F7
key to toggle between the valid baud rates.
Change of keyboard address
Press the
F9
key to get to the
Kdb.No
menu.
Press the
F4
key to toggle between the valid keyboard numbers.
Set the function of the AUX keys
Press the
F9
key to get to the
AUX
menu.
Press the
F6
key to toggle between
Latch/No Latch/1801M
function.
Change the password
Press the
F9
key to get to the
Change Password
menu.
Press
F7
and enter the new password (4 digits).
Re-enter the new password.
Set the volume of the key-press beeper
Press the
F9
key to get the
Beep
menu.
Press the
F4
key to toggle between
HIGH
-
LOW
-
OFF
.
Test and re-calibrate joystick
Use this function to re-calibrate the joystick in case e.g. pan & tilts are moving although the
joystick is released.
Press the
F9
key to get the
Test joystick
menu.
Press the
F7
key to enter the test and re-calibation functions.
Installation and Setup instruction for Keyboard Series 1500
Page 9
