ERNITEC 1500M Installation And Setup Instructions Download Page 13

Page: 13 / 15

Auto panning (BDR-575 and ICU only)

To start auto panning, press:

AUTO

Start auto panning

Call Preposition (not available on Series BDR-51X)

To call preposition number 3, press:

Call preposition number 3
Note: Valid range BDR-55X and ICU: 1-30, BDR-575: 1-126.

Start Sequence of pre-positions

To start the pre-programmed sequence of pre-positions, press:

Start sequence.
The sequence of pre-positions is automatically aborted when
another function is operated.

Remove/insert text (Series BDR-550 only)

Remove/insert the text generated by the currently controlled telemetry receiver:

150XM

Remove or Insert text from

telemetry receiver

Auto focus (ICU only)

In order to switch to auto focus, press:

AUTO

Enable auto focus

Auto iris (ICU only)

In order to switch to auto iris, press:

AUTO

Enable auto iris

Installation and Setup instruction for Keyboard Series 1500

Page 13

Summary of Contents for 1500M
















Search results

Summary of Contents for 1500M

Reviews:

Related manuals for 1500M

Brands by name

Popular brands

ERNITEC 1500M, Installation And Setup Instructions

Search results

Summary of Contents for 1500M

Reviews:

Related manuals for 1500M

Brands by name

Popular brands