ERNITEC 1500M, Installation And Setup Instructions

Page: 15 / 15

Set the pre-position sequence dwell time
To set the dwell time for the telemetry receiver currently being controlled to 15 seconds, press:
1
ð ð
5
ð ð
Set dwell time to 15 sec.
The dwell time range is 0 to 255 sec.
Set Home position
To use preposition 8 as Home-position with a time-out of 60 seconds, press:
8
ð ð ð ð
6
ð ð
Use pre-position 8 as Homeposition with a 60 sec. time-out
Note, that the time-out entry automatically is multiplied with 10.
Max. time-out entry is 255 corresponding to 2550 seconds.
Set Auto panning limits (available on the ICU & BDR-575 only)
To set the two limit positions for auto panning, for the camera being controlled:
1
ð ð
SHIFT
+
AUTO
2
ð ð
SHIFT
+
AUTO
1501M/1503M only 1501M/1503M only
Set auto panning limit 1 Set auto panning limit 2
Installation and Setup instruction for Keyboard Series 1500
Page 15