ERL F-PRO 116, User Manual

Page: 73 / 157

D05125R01.20 F-PRO 116 User Manual 7-1
7 Settings Configuration Software
This section describes the supporting software used to set the relay parameters.
The offliner software tool is used for these purposes:
F-PRO Offliner is used to configure all of the protection and system parameter variables on the IED.
Setting files are created locally on a personal computer with the Offliner software and then are sent
to the IED through Hyper Terminal
(see “ Terminal Interface ” on page 4-7) via a communication link
(see “ Communication wiring ” on page 2-2).
7.1 Offliner Settings Software
Introduction
F-PRO Offliner is used to configure all of the protection and system parameter variables on the
IED. The following section provides a full breakdown of the user interface and all of the features
available within the software.
More detailed information about relay settings and protection functions are provided in Chapter
5.
This is followed by a description of the main branches from the Tree View. This section provides
all information for Identification, System Parameters, SCADA Settings summary, Setting Groups,
ProLogic, LED Matrix, Output Matrix, reset type for Led and output contact and Settings summary.
Figure 7.1: Protection Summary
Setting Tree
Setting Area