ERL F-PRO 116, User Manual

Page: 44 / 157

4-14 F-PRO 116 User Manual D05125R01.20
Get Fault Log
To get the Fault log from the relay enter A. After enter the value A, logged faults in the relay will
be appeared with fault description as shown below.
Figure 4.15: Fault Log
To save the Fault Log file as a text file, enter the value A in the terminal screen to get the Fault
Log. Then perform the following steps:
1) In the transfer menu, select Capture text
2) Browse for the desired Local path
3) Give the file name
4) Click Open
5) Enter the value A to get the Fault Log
6) After the Faults text is captured Select Capture text -> Stop
7) The Faults are now captured as a text file
Erase Fault Log
To Erase Fault Log data from the relay, Enter the value B. After the fault logs got erased, the
following text will appear on the terminal window ‘Fault Log Data Erased Successfully’