ERL F-PRO 116, User Manual

Page: 78 / 157

7-6 F-PRO 116 User Manual D05125R01.20
Sending a New Setting
File to the Relay
1. Make sure the settings version and the serial number of the relay in the
setting file match. The relay will reject the setting file if either the serial
number or the settings version does not match.
A “ serial number discrepancy ” message may appear. This is to ensure that
user is aware of the exact relay in which settings are intended to be loaded.
If this happens, check the relay serial number using the terminal mode ID
menu item. Type this serial number into the F- PRO Serial No.box in the
Identification tab display area of Offliner Settings. Alternately user may
check the Ignore Serial Number check box to bypass serial number
supervision.
2. Check the serial number and the settings version of the relay. The Device
Serial Number and Required Settings Version on the Identification screen
indicate the serial number and the settings version of the relay.
Creating a Setting File
from an Older Version
1. Offliner Settings displays a default setting file on start up showing the
settings version in the bottom status bar. As an example, F-PRO Offliner
is shipped with a set of default sample files of older settings versions. The
sample file is “v1 sample.fps”. The sample file contains default values of
an older settings version. For a new installation these sample files are
placed in the default directory C:\Program Files\ERL\F-PRO Offliner
Settings or user can choose the path during the Offliner software
installation. If an older version of F-PRO Offliner was previously installed
on your PC, then the default directory may be C: \Program Files\apt\F-
PRO Offliner Settings.
2. Open a sample file of the desired version. Use File/Save As to save
the sample file to a new file name. Then edit t he s etting file and the
serial number, save it and load it into the relay.