48
ADVANCED OPERATION - Program editing
Change fiber type and splicing process
7
CHANGE FIBER/PROCESS
“
“
Open screen-viewer
View
At this point the splicer will ask if you want to change fiber
type and/or splicing process. If you have copied over a
source program (step 4) for which you only want to modify a
few parameters, you may be able to skip this step. However,
this is also a chance to verify that the right fiber type and
splicing process are specified. To see these parameters you
can press VIEW and bring up the screen-viewer. The fiber
type and splicing process will be highlighted.
If you wish to change fiber type and/or splicing process,
press Yes.
If you do not, press No and go on to Step 8.
A
The splicer will start with fiber type and ask you whether
you want to change it by displaying “Change fiber type?” in
the
message field
. If you are interested in changing the fiber
type, press Yes.
If you are only interested in changing the splicing process,
press No, and continue reading at “B” on the next page.
The splicer will then present you the options for fiber type in
the same format as it did with security types: Each fiber type
will successively be shown in the message field, while you
scroll through them by pressing No.
When the fiber type you want is shown in the message field,
you press Yes.
PREFUS TIME
0.2
S
PREFUSE CURR
10.0 MA
GAP
50.0 UM
STANDARD FIBER
NORMAL SPLICING
Screen-viewer with fiber type and splicing
process highlighted
Affirm wish to change
fiber type and/or process
Yes
CHANGE FIBER TYPE?
“
“
To change fiber type
Yes
“
“
Choose fiber type
Yes
STANDARD FIBER?!
No
TITANIUM FIBER?
No
DEPRESS. CLAD. FIBER
No
ERBIUM FIBER?
No
INVISIBLE CORE FIBER?
No
MULTIMODE FIBER?