Ericsson DT412 User Manual Download

Page: 94 / 134

Modes

DT412/DT422/DT432

Modes

The phone is equipped with ten modes. Two modes are preset at

delivery and the remaining eight modes are defined by you. The

preset modes are;

Normal

, and

In charger

The option

Switch off

is also located in the

Modes

menu.

Normal mode

The

Normal

mode is the default mode.

In charger mode

The

In charger

mode is activated when the phone is placed in the

charger and deactivated when removed, it cannot be manually

selected. Your last selected mode is automatically chosen when

the phone is removed from the charger.

User defined modes

Eight modes can be defined and saved by you. The modes can, for

example, be used to create a special headset mode with different

ring signal volume and automatic answer of incoming calls.
Another example is when several users are sharing the same

phone. Each user can then define his own settings, for example;

type of ring signal, volume, answering method, Soft key settings

etc. Note that one has to change to the user defined modes

manually.

Summary of Contents for DT412







































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Ericsson DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands