Ericsson DT412 User Manual Download

Page: 77 / 134

DT412/DT422/DT432

Messages

Text messages

The twenty last received text messages are stored in the message

list. To send text messages see section “

SMS (Short Message

Service)

” on page 80.

Notes:

If there is not enough free memory to store an incoming

message the oldest message will be deleted. This means

that it is not always possible to store twenty messages, it

depends on how big the messages are.

By pressing any key (not Alarm, Mute, and Volume keys) the

received message is marked as read.

Press to enter the message list.

Scroll up or down until you find the message.

The selected message is highlighted.

Press to read the message.

If the Clock and Date function is set, you can on the same day the

message was received, see the time for the message. The time

stamp is changed to a date stamp the following day. See section

“

Clock settings

” on page 106.

The size of the text can be changed or be displayed upside down,

see section “

Settings

” on page 99.

Lunch today?

From: Phil Collins

11:00 15/12

Delete

Exit

13:05

Summary of Contents for DT412







































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Ericsson DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands