Ericsson DT412 User Manual Download

Page: 87 / 134

DT412/DT422/DT432

Other Useful Features

Account Code

This function is used to charge a call to an account number or to

prevent unauthorised calls from your phone. The Account Code

can have 1 to 15 digits.

*61*

Dial.

Note:

Norway and Finland, dial

å # æ

Dial the Account Code and press.

Dial tone.

Dial the digit or digits to get an external line and the external

number.

Ongoing external call

When the Account Code function is used to charge a call it is also

possible to connect an ongoing external call to an Account Code.

During the call:

Press to put the ongoing call on hold (see display).

Dial tone.

*61*

Dial.

Note:

Norway and Finland press

å #

Enter Account Code and press.

Dial tone.

Press (see display).

æ æ

Press to resume the call that was put on hold.

Summary of Contents for DT412







































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Ericsson DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands