91
DT412/DT422/DT432
Alarm
Alarm
Note:
The Alarm features are only available for the DT422
and DT432 phone.
When you work alone and at risk, your personal safety is important.
For situations like this, the DT422 and DT432 phones are equipped
with a red Alarm key on top. When you are in trouble, just press the
Alarm key to summon help by sending a preset message to the
alarm central, which distributes it (requires an external alarmserver).
Note:
The Alarm features may be restricted or not
available. Ask the system administrator for the availability
and for more information.
Alarm with data
Additional data for example a location code, can be sent along with
an alarm. The data must manually be programmed by you. To use
the function, one Soft/Hot key must be defined as a short cut to the
menu
Edit alarm data
, see section “
Hot keys and Soft keys
” on
page 100. The stored data is added to all types of alarm at
transmission.
Automatic call after an alarm
The phone can be programmed to call a predefined phone number
directly after an alarm. One Hot key must be programmed with the
specific phone number, see section “
Hot keys and Soft keys
” on
page 100. It can be any external or internal phone number but also
a pre-defined group of phones. The phone can be configured to
call the same number for all types of alarms or to call different
numbers depending on the alarm type.
The automatic call can be programmed with speech monitoring,
i.e. the microphone on the phone that sends the alarm is discreetly
activated and will give the answering party opportunity to listen and
to take an appropriate decision on how to act.
