Ericsson DT412 User Manual Download

Page: 95 / 134

DT412/DT422/DT432

Modes

Change modes

Press.

The last used tab is marked.

Select

Modes

Press to enter

Modes

A list with all modes is shown. See also section “

Menu structure

”

on page 22.

Scroll up or down until you find the required mode.

Select

Press (see display).

The name of the selected mode is shown.

Note:

A Soft/Hot key can also be programmed to change

modes, see section

“

Hot keys and Soft keys

” on page 100

Press to leave the

Modes

menu.

Change mode settings

Press.

The last used tab is marked.

Select

Modes

Press to enter

Modes

A list with all modes is shown. See also section “

Menu structure

”

on page 22.

Scroll up or down until you find the required mode.

Press to view the settings.

The settings are basically the same as in the

Settings

menu, but

you also have the possibility to set Absent on/off, choose

answering method, and give the mode a new name. See sections

“

Absent

” on page 79, “

Change answering method

” on page 34

and “

Settings

” on page 99.

Note:

It is possible to set that a mode should not be shown

in the list. This is an easy way to hide modes that are not

used. See section

“

Customizing the menus

” on page 26

Press to leave the

Modes

menu.

Summary of Contents for DT412







































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Ericsson DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands