Ericsson DT412 User Manual Download

Page: 68 / 134

Call Forwarding

DT412/DT422/DT432

To cancel from an external phone

The external phone must be of push button type provided with

pound key (

) and star key (

) or a mobile phone adapted for dial

tone pulses (DTMF).

Call the DISA function at your office.

Dial tone.

*75*

Dial.

z *

Dial the Authorization Code and press.

z #

Dial your own extension number and press.

Dial tone.

#10*

Dial.

z #

Dial your own extension number and press.

Replace the handset.

To design and order your search profiles

The search profiles are installed or changed by your system

administrator. In order to set up your profiles, copy the setting form,

fill in your new or changed profiles and give it to your system

administrator.

Note:

If a profile handling application is connected to your

system, you can edit profiles via your Intranet. See separate

instructions for the application.

Summary of Contents for DT412







































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Ericsson DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands