Ericsson ACeS OG698 User Manual Download Page 46

Page: 46 / 88

ACeS OG698 Phone User’s Guide

Page 42

Note:

Some features and menus are operator dependent

Version P1C

All calls, On Busy, Unreachable, or Cancel All:

◗

If you selected

All Calls, On Busy,

Unreachable

No Reply

, and a phone

number is on the display when you select the

Activate

option, it will be displayed with the

Activate

option.

Press

YES

to activate the option and divert calls to

the number displayed. Usually the last number
you diverted calls to is displayed but you can

replace the number with a new one.

◗

If no number is on the display and you select the

Activate

option,

Enter

displays. Enter the number that you want calls diverted to and press

YES

to activate.

There may be a short delay before the network
responds.

Please wait

is displayed, followed by

On busy/No reply - Divert ON

, depending

on which divert option you chose. The selected
phone number is also displayed.

Your phone will display information about any activated call divert each time
you turn the phone on.

Checking the Divert Status

To check the status of call Divert:

Select

CALLS\Divert

menu.

Select the call type you want to check

Scroll to the

Check all

option and press

YES

Note!

Check all

option is not available in Satel-

lite mode.

Cancelling A Call Divert

To cancel a Call Divert:

From the

CALLS\Divert

menu, select the

call divert you want to cancel. To cancel all call
diverts, select

All numbers/Cancel all

Press

YES

The message

Please wait

appears followed by a message

Call divert can-

celled

Call Waiting

Your phone allows you to handle more than one call simultaneously. This
means that you may hold a call that is in progress and make or answer a sec-
ond call, and then switch between the two calls.

DIVERT

Busy

Activate

DIVERT

Check

all

DIVERT

Cancel

all

Summary of Contents for ACeS OG698

























































































Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands

Ericsson ACeS OG698, User Manual

Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands