Ericsson ACeS OG698 User Manual Download Page 27

Page: 27 / 88

ACeS OG698 Phone User’s Guide

Version P1C

Note:

Some features and menus are operator dependent

Page 23

Extensive Search

If no other satellite search is suggested you can select an Extensive search.

To select an Extensive search (this may take several minutes):

Select

NETWORKS/Search opt/Satel-

lite

and press

YES

Scroll to

SEARCH OPT/One search

and

press

YES

Select

ONE SEARCH\Extensive

search.

Please wait...

will display

When a network is located you are prompted to

select it or reject it.

The information displayed refers to:

◗

System operator: Home or Roam

◗

Spacecraft (multi-spacecraft system only): Home or Roam

◗

Press

YES

to accept the Satellite Network displayed

◗

Press

and the search will continue

Single Search for a GSM Network

You must be in GSM mode to attempt to access the NETWORKS/Search opt/
GSM menu. To perform a single search for a GSM network:

Scroll to

NETWORKS/Search opt/GSM

and press

YES

SEARCH OPT/Select net

displays. Press

YES. The list of GSM networks is dis-
played

Scroll through the list of networks until the

network you want to use is displayed

Press

YES

to search for this network

Search Without Changing Defaults

You can search for a satellite or GSM network without changing the default
search pattern with the

New Search

option. See “New Search” on page 21.

Update the Network Lists

You can update the GSM and the Satellite network lists, which are used when
searching for service, one list at a time.

ONE

‚

Spot

beam

(27)

OPT

‚

One

ONE

‚

Extensive

NETWORKS

‹

opt

GSM

OPT

⁄

Select

net

Summary of Contents for ACeS OG698

























































































Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands

Ericsson ACeS OG698, User Manual

Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands