Ericsson ACeS OG698 User Manual Download

Page: 25 / 88

ACeS OG698 Phone User’s Guide

Version P1C

Note:

Some features and menus are operator dependent

Page 21

GSM Preferred Mode

GSM pref

mode, the phone searches first for

a GSM network.

◗

If no GSM network is found the phone begins a

search for a satellite network

◗

If no network is found,

No Network

is dis-

played and the search repeats after a short while
You can enter NETWORKS/

New Search

at any

time to restart the search process or change it.

New Search

If no network is found by using the searches
described above, or you want to change the cur-
rent network, you can initiate a new search on a
mode opposite the one you are currently in, or
you can initiate another search in the current
mode.

This allows you to do a quick search without changing any of the defaults in
the

NETWORKS/Systemmode

menu.

New search in opposite mode

If you are operating in

Satellite Preferred

mode or

GSM Preferred

mode and want to switch to the opposite mode:

Scroll to the

NETWORKS

menu. Select

New search/<opposite mode>

Press

YES

A search begins for a network in the opposite
mode.

New search in current mode

If you are operating in

Satellite Only

GSM Only

mode you can initiate

a new search in the current mode.

Scroll to

NETWORKS

menu, select

New

search\<current mode>

is displayed

Press

YES

A search begins for a network. in the current
mode.

Single Search for a Satellite Network

Note!

Contact your operator for a Channel number. If you are unsure of the

Spot beam and Channel numbers you may attempt to use the data displayed
with each prompt. You must be in Satellite mode to attempt to access the

NETWORKS/Search opt/Satellite/One search

menu.

Searching

GSM?

network

NETWORKS

‚

New

GSM

NETWORKS

‚

New

GSM

NETWORKS

‚

New

GSM

NETWORKS

‹

New

Satellite

Summary of Contents for ACeS OG698

























































































Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands

Ericsson ACeS OG698, User Manual

Search results

Summary of Contents for ACeS OG698

Reviews:

Related manuals for ACeS OG698

Brands by name

Popular brands