ACeS OG698 Phone User’s Guide
Page 28
Note:
Some features and menus are operator dependent
Version P1C
calling and you will not be able to take advantage of the cost saving feature
Optimal Call Routing.
Roaming
When you travel outside your home network area
or switch to your secondary subscription, your
phone will be in Roam mode. The triangular
roaming indicator will display. You must dial the
complete phone number of the person you are
calling, including area and country code.
Roaming in Satellite Mode
This feature is not available now but will be in the future.
When roaming in satellite mode is available, you will only be able to receive
service from an ACeS-compatible, a non-ACeS satellite system, or a non-home
ACeS satellite system. SAT will be displayed instead of ACeS.
Roaming in GSM Mode
When roaming on a non-home system, the
national roaming indicator will be displayed,
together with the abbreviated country and net-
work name.
Roaming with a Standard GSM SIM Card
Your phone will operate in ACeS mode with a standard 3-volt GSM SIM card.
You can change certain preset parameters to set your personal preferences for
use in GSM or Satellite mode. Also see “Operating With a GSM Standard SIM
Card” on page 6.
Receiving a Call
Note!
The phone must be turned on and within
range of a network before a call can be received.
When you receive a call, the phone rings and the
indicator light on top of the phone rapidly blinks
green. The display shows
Answer?
.
If you are in GSM mode and your subscription
includes the service Calling Line Identification
(CLI), and the caller’s network sends the number,
you will see the caller’s number on the bottom
row of the display. If the number is stored with a
name in the phone book, the name will be shown
in the display.
Note!
Calling Line Identification is not currently available in Satellite mode.
¤
@
fl
¤
@
fl
S.
Talia
¤
@
Answer?
¤
@
fl
Answers?
Charles
Brown
5555551212
