11
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In
the event that the remote is not paired with the base, follow the steps below.
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back in to your power outlet. Perform Step 2 within 10 seconds,
while the control box light is flashing.
pairing remote control
Hold the
and
button on the remote, till
the button backlight on the remote start flashing, at the
same time the LED light on the control box will stop
flashing, that means the pairing process is completed,
please then release the pairing button.
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
Ergomotion customer service: 1-888-550-3746
Power Cord
Power Supply
1
3
2
Summary of Contents for quest 1.0
Page 33: ...17 notes...
Page 57: ...21 notes...
