7
installation guide
Always use two people when setting up the base.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
With the help of an able-bodied assistant, place the carton on the
floor with the arrows pointing downwards.
Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects.
Remove the bed base from the box keeping the bottom of the base
facing upwards.
Step 1:
First, remove the offline voice
tube from the card slot.
Step 2:
Disconnect The Wand to
the control box cable via the 3-pin
connector.
Step 3:
Press down the Mounting
Bracket(Figure A) ; at the same
time slide back the offline voice box
as shown in the Figure B to remove
the offline voice box.
Step 4:
After removing the offline
voice box, when installing on the
other side, slide the wand device
onto the mounting bracket until you
feel it click into place.
If you need to change the offline voice location, the steps are as
follows:
2
3
1
B
A
Summary of Contents for quest 1.0
Page 33: ...17 notes...
Page 57: ...21 notes...
