12
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In
the event that the remote is not paired with the base, follow the steps below.
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back in to your power outlet. Perform Step 2 within 10 seconds,
while the control box light is flashing.
pairing remote control
Press and hold down the Pair button. The LED
light on the remote will start flashing. When the
LED stops flashing, the illuminated light on the
Control Box will go out. Release the Pair button.
The remote is now paired to the adjustable base.
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
Ergomotion customer service: 1-888-550-3746
Power Cord
Power Supply
1
3
2
Summary of Contents for quest 1.0
Page 33: ...17 notes...
Page 57: ...21 notes...
