7
installation guide
Always use two people when setting up the base. With the help of an able-bodied assistant, place the carton on
the floor with the arrows pointing downwards. Remove the binding straps and packing materials, making sure not
to puncture the box with any sharp objects.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
Remove the bed base from the box keeping the bottom of
the base facing upwards.
• Untwist the mattress retainer bar from the frame and set aside.
• Legs are shipped fully assembled. Alternative heights in 3"
increments can be achieved by removing leg segments.
• To install the legs, thread the washer over the bolt of the leg
with the recessed side facing the leg, and tighten by hand.
Do not over tighten.
Flip the base & connect the cables.
• Uncoil the Input Cord (connected to
control box’s Power port) and plug it into
the Power Supply.
• Carefully flip the base over on to its legs.
Important: Two people are required to move the bed base. Do
not drag across the floor. Do not rest frame on its side, excessive
pressure may damage the legs.
• Insert the Power Cord into the Power
Supply.
• Plug the Power Cord into a power outlet.
A surge protector is recommended.
2
1
Summary of Contents for quest 1.0
Page 33: ...17 notes...
Page 57: ...21 notes...