9
headboard bracket installation guide (optional)
a.)
Align the hole in the bracket to the brass sleeve into which
the leg threads. Hold the bracket in place and screw the leg
into the base until it is snug. DO NOT OVERTIGHTEN. Too
much force may cause the leg to spin freely.
b.)
Align the tab with the hole in the frame (located towards
the foot of the base) and use a short bolt and nut to secure
the bracket. Make sure the bolt is tight.
Headboard Brackets are an optional accessory.
A 9/16” (14 mm) & 1/2” (13 mm) socket and crescent wrench are necessary to complete installation.
Attach the plastic spacer and T-Bracket.
a.)
Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.)
To install the plastic spacer and attachment plate, you will
need (2) long bolts and (2) nuts. Place the spacer and
attachment plate in the desired location and slip the bolts
through the holes with the head of the bolt facing outward.
Position the bolts diagonally on the spacer. Use the 9/16”
socket and wrench to tighten the bolts.
You may now connect your headboard to the attachment
plates using the remaining short bolts and nuts to secure it to
the brackets. The heads of the bolts will face outward. Use a
9/16" socket and 1/2" wrench to tighten the bolts.
2
3
1
Summary of Contents for quest 1.0
Page 33: ...17 notes...
Page 57: ...21 notes...
