ergoline ergoselect 400, Operator'S Manual

Page: 23 / 56

- 23 -
Use the softkeys
↑ ↓
to select the parameter to edit.
At Select, for example, you can choose the protocol type:
‑ Step (load increase in steps) or
‑ Ramp (continuous load increase).
Press SELECT to save the selected protocol type.
To cancel the selection, press the key.
All other parameters are edited in the same way.
Using the arrow keys (
↑ ↓
), highlight a parameter and
confirm the selection with SELECT: the corresponding
value appears in reverse video and can be changed with
the arrow keys
↑ ↓
.
Pressing SELECT will save the new value.
You exit the configuration with
.
C
ontrast
The display contrast is adjustable in the range from
0 to 100%.
l
oad
C
hanGe
Here you determine the increments for each load change.
Depending on your choice, each key press will change the
load by +/‑ 1, 5, 10 und 25 Watts.
s
electing the paraMeter to edit
e
diting the paraMeter value
a
djusting the display contrast
Contrast
50 %
Select
s
electing the increMent for Manual load changes
Load Change
+/- 1 Watt
+/- 5 Watt
+/- 10 Watt
+/- 25 Watt
Select
Protocol 6.
Select Step
Basic Load 25 W
Stage Time 2 min
Load Stage 25 W
Select
Protocol 6.
Select Step
Basic Load 25 W
Stage Time 2 min
Load Stage 25 W
Select