ergoline ergoselect 400, Operator'S Manual

Page: 13 / 56

- 13 -
C
onneCtInG the
P
ower
C
ord
• Power input, power switch and the connections for
external devices are located on the back of the drive
unit.
• Connect power cord to power input.
• Using the strain relief supplied, secure the cable to the
frame.
Caution
• Equipment Damage •
Before connecting the ergometer to the power line, check that
the line voltage corresponds to the ratings on the type plate.
The type plate is located on the back of the ergometer, at the
bottom.
p
ower input and power switch
Caution
• Disconnection from Power Supply •
Pressing the power switch or removing the power cord discon-
nects the device from the power supply.
Removing the power cord results in a complete disconnection
from the power supply (all poles).
Ensure that the power plug is readily accessible at all times.