ergoline ergoselect 400, Operator'S Manual

Page: 14 / 56

- 14 -
C
onneCtInG the
eCG C
aBle
ergoselect ergometers can be connected to electrocardio‑
graphs and PC‑based ECG systems of most manufacturers.
Different connection cables are available to support different
communication modes (digital, analog, remote start, etc.).
The appropriate cable is plugged into the corresponding
socket on the connection panel (Port 1, USB) and secured
with the strain relief.
t
ransPort
• Disconnect the power cord and the connection cables.
• Open the clamping lever at the chair's guide tube and
take off the chair, pulling it towards the rear.
• When you have reached the new location, lower the
ergometer very carefully to avoid damage.
Caution
• Equipment Damage •
Avoid strong vibrations of the ergometer during transport.
eKg / pc
connection
USB PC connection via USB (virtual COM)
PORT 1 Digital connection RS232 (remote control
by PC or ECG recorder,
s
train reliefs for cables
Hint
• connecting cables •
Only use connecting cables released by ergoline.
To use the integrated USB connector, a special driver is required
- contact ergoline.