- 27 -
EKG T
YPE
The selected EKG Type determines the communication
method with the ECG recorder, PC-based ECG system, etc.
To prevent an accidental change of this setting, the menu
is protected with a password.
Using the arrow keys, enter 003 and confi rm the entry
with SELECT.
All ergoselect ergometers support the following communi-
cation modes:
•
Analog with pulse
Remote start mode; prior the each load change, the
ergometer generates a control pulse and sends the
corresponding data via the interface.
•
Analog / Digital
An analog voltage controls the load - blood pressure
measurements can be initiated with digital commands.
• Digital
(default)
The communication with the ergo meter is entirely
controlled with digital commands.
• Analog
IN-OUT
The entire communication (load control and BP mea-
surements) is controlled with analog signals.
No digital data will be sent.
Select the communication mode and confi rm with SELECT.
S
ELECTING
THE
ERGOMETER
COMMUNICATION
MODE
EKG Type
Analog with pulse
Analog / Digital
Digital
Analog IN-OUT
Select
Note
•
The EKG Type needs to be selected only when the ergome-
ter is connected to an ECG unit. The selection is part of
the installation procedure.
•
The "Analog/Digital" and "Digital" communication is only
possible when PC Mode is selected from the main menu or
when this is the default mode.
E
NTERING
THE
EKG T
YPE
PASSWORD
EKG Type
003
Select
