ergoline ergoselect 100, Operator'S Manual

Page: 15 / 58

- 15 -
P
REPARING THE
P
ATIENT
A
DJUSTING THE
S
ADDLE AND THE
H
ANDLEBAR
On the ergoselect 100, you adjust the saddle height manu-
ally with a clamping lever. On the ergoselect 200, the saddle
height is electrically adjusted with the corresponding keys
on the control terminal (the display below the saddle indi-
cates the saddle height).
With the pedal in the bottom position, the angle between
the axis formed by the upper body and the thigh should be
approximately 10°.
Set the handlebar to a position where the patient sitting
upright on the saddle can reach it easily.
To do so, open clamping lever 1 and set the handlebar to a
suitable angle.
On the ergoselect 200, the height of the handlebar can
additionally be adjusted with clamping lever 2 - the hori-
zontal bar should be approximately at the samel level as
the saddle.
A
DJUSTING SADDLE AND HANDLEBAR
1 Adjustment of the handlebar angle
2 Adjustment of the handlebar height
(ergoselect 200 only)
3 Adjustment of the saddle height (ergoselect 100 only)
4 Saddle height display (ergoselect 200 only)
Note
• Tighten the clamping levers only as far as necessary, NOT
with maximum force.
• Lubricate the clamping lever threads quarterly at mini-
mum, using a suitable lubricant (e.g. OKS470).