11
equipment, they must be handled with care.
•
Protect gas cylinders containing compressed gas against excessive heat, mechanical shock,
slag, open flames, sparks and arcs.
•
Mounted gas cylinders vertically and fix as instructed, to prevent fall over. Do not put the
torch near the gas cylinder. The gas cylinder must not being touched with the welding
electrode.
•
Explosion hazard - never weld on a pressurized cylinder.
•
Only appropriate, suitable equipment (regulators, hoses and fittings, ...) must be used.
Protective equipment and gas cylinders must only be used in good condition.
•
If an gas cylinder valve is opened, turn away the face from the outlet.
•
Close valve of the gas cylinder after use.
•
Store gas cylinders only with the shielding cap in place.
Before any maintenance works, always isolate the unit from the mains electrical
supply (pull the plug!). Electric shock can kill.
Only people over 18 Years of age are allowed to work with this welding set.
Read Safety Leaflet D/GN/AA/7.41 or BGV D1 and any other appropriate leaflets
available to you.
WIMPORTANT INFORMATION - READ CAREFULLY
It is recommend that before any form of welding equipment is
operated the operator should fully conversant with the relevant
safety measures prescribed for welding duties.
