MT CAM AG_v1.doc
MT STAR AG
Indice : 1
18/10/2016
3 /
25
ERECA SAS 75 rue d'Orgemont, 95210 SAINT GRATIEN France
Tel +33 1 39 89 76 23 www.ereca.fr
1
CAM RACER OVERVIEW
The CAM RACER is a complete optical fiber transmission solution for camera connexion for OB Van, Studio
and Cinema applications. It is composed of a camera dockable transmitter and a 1RU basestation receiver.
1.1 KEY FEATURES
The following key features makes the CAM RACER a product of choice for all kind of production from HD to
8K applications.
•
Transmit Two 12G-SDI channels plus two 3G-SDI channels.
•
Power unit delivers 140 Watts to the camera after 450 meter of standard 9.2mm SMPTE cable.
•
An automatic battery backup will help the remote powering system if more power is needed suddenly.
•
Signals control and Setup is done through internal web server. Most signals are also reported on LED
display of each unit.
•
An Oled display gives direct access to optical receiving levels and internal web server IP address.
•
An internal audio mixer allows user to mix between talkback, programs inputs and local audio channels
for Eng and Reporter headsets.
•
Camera control channel supports: Ethernet, RS422 Serial, Canon RC-V100 protocol (Enhanced Lanc).
•
Camera synchronization supports: Two composite video signals and one Time code.
1.2 SIGNAL CAPACITY
Each CAM Racer comes in standard with the following signal set:
•
2 3G / HD / SD signals from Camera,
•
1 Viewfinder HDSDI from basestation,
•
1 Monitoring HDSDI from the camera (HDMI or BNC input autoswitch),
•
2 Genlock from basestation (Composite video / Black burst / Tri-level),
•
2 Bidirectionnal audio with mic preamp and phantom power at camera side,
•
1 Intercom in/out with headset interface at camera side,
•
1 Time code from basestation,
•
1 Ethernet 10/100 Mbps,
•
1 Serial data RS 232/422/485,
•
1 Canon RC-V100 protocol (Enhanced Lanc),
•
1 Red Tally Contact closure from basestation.
Two options are available for more complex setups (4K/8K, 2 Intercom separate headsets):
•
2 extra 12G / 6G / 3G / HD / SD signals from Camera (board addon),
•
2
nd
Intercom in/out with headset interface at camera side +
2
nd
Tally (Green) Contact closure from bases
2
nd
Serial data RS 232/422/485 (connector addon).
