ERECA CAM RACER Technical Presentation Download Page 22

Page: 22 / 25

MT CAM AG_v1.doc

MT STAR AG

Indice : 1

18/10/2016

22 /

ERECA SAS 75 rue d'Orgemont, 95210 SAINT GRATIEN France

Tel +33 1 39 89 76 23 www.ereca.fr

3.4.2 VOLUMES SETTINGS SUB SECTION

Please see audio mixer section (2.6) for detailed description.

3.4.3 VARIOUS SETTINGS SUB SECTION

This sub section groups all the single/simple configuration commands as:

•

Serial interface levels RS232/422/485.

•

Tally input levels and Led disable,

•

Intercom forgotten in talk position can be released here by ticking the right box,

•

Lanc protocol selection (Legacy / RCV-100) – Works only with RC-V100.

•

Turn Composite 1 input to high impedance,

•

Disable all the leds on the cam racer unit.

3.4.4 SAVE RECALL

User can Download / Browse / Import configuration from the corresponding buttons. Files are saved on the
memory of the user computer.

Summary of Contents for CAM RACER


























Search results

Summary of Contents for CAM RACER

Reviews:

Related manuals for CAM RACER

Brands by name

Popular brands

ERECA CAM RACER, Technical Presentation

Search results

Summary of Contents for CAM RACER

Reviews:

Related manuals for CAM RACER

Brands by name

Popular brands