MT CAM AG_v1.doc
MT STAR AG
Indice : 1
18/10/2016
11 /
25
ERECA SAS 75 rue d'Orgemont, 95210 SAINT GRATIEN France
Tel +33 1 39 89 76 23 www.ereca.fr
2.4 DISPLAY UNIT
2.4.1 CAMERA HEAD
The display panel enables user to perfom Three different functions, the SETUP led indicates in which mode
is the display:
•
1) Monitor alarms and signal presence. (Setup OFF),
•
2) Various volume adjustments (Setup Lit Solid),
•
3) Monitor which Talkback channel is used (Setup Blinking).
Note also that all leds can be forced off from the webpage settings.
2.4.1.1 MODE 1 (NORMAL)
This is the default mode, in this mode the texts colored in white apply.
Major Status:
ON:
Green LED, ON when all internal supplies are /- 5% of target.
SYNC:
Green LED, ON when the unit is SYNC’ed on the basestation signal.
ALARM:
Red LED, ON when something is wrong in the unit (Bad optical power on the receiver, Too low or
too high laser current).
Various signal status:
TIMECODE:
Green LED, ON when timecode is delivered on the camera unit output.
AUDIO IN:
Green LED, ON when the optical power is low on main path.
AUDIO OUT:
Green LED, ON when the optical power is low on main path (if option fitted).
PAL1:
Green LED, ON when a composite/trilevel video is delivered on the camera unit output 1.
PAL2:
Green LED, ON when a composite/trilevel video is delivered on the camera unit output 2.
SERIAL1:
Green LED, ON when activity (TX or RX) on the serial port 1.
SERIAL2:
Green LED, ON when activity (TX or RX) on the serial port 2.
SDI signal status:
HD1 – HD4, HDIN:
Corresponding led is lit Green if a SDI signal is detected on the corresponding input.
HDOUT:
Led is lit Green if a valid HD signal is delivered to the Monitoring output port (Means that the
internal circuitry is able to extract the signal from the TDM and re-create the corresponding clock of
the signal fed at the basestation).
In this mode rotating the “Blue” button will adjust the global listen volume of the Intercom headset 1.
