Erbe VIO 300 D, User Manual

Page: 39 / 54

39
/ 54
9 • Cleaning and Disinfection
8
0113-90
1
08
.1
1
CHAPTER 9
Cleaning and Disinfection
Wipe disinfection
For cleaning and disinfecting the surfaces of the unit or of the equipment cart, ERBE
recommends a wipe disinfection. Use only disinfectant which complies with the rel-
evant national standards.
Instructions for cleaning and disinfection
Mix the disinfectant in the concentration specified by the manufacturer.
Clean surfaces contaminated with blood before using the disinfectant; otherwise it
may be less effective.
Wipe the surfaces. Make sure the surfaces are treated uniformly. Comply with the
action time of the disinfectant specified by the manufacturer.
Safety Instructions
WARNING
Connection of unit / equipment cart and power supply dur-
ing cleaning and disinfection
Risk of electric shock to the medical personnel!
¨
Switch off the device. Unplug the power cord of the device/
equipment cart.
WARNING
Flammable detergents and disinfectants, flammable solvents
in adhesives used on the patient and on the device / equip-
ment cart
Risk of fire and explosion to the patient and medical personnel! Risk
of damage to property.
¨
Use products that are not flammable.
If the use of flammable products is unavoidable, proceed as fol-
lows:
¨
Allow the products to evaporate completely before switching on
the device.
¨
Check whether flammable liquids have accumulated under the
patient, in body recesses such as the navel, or in body cavities
such as the vagina. Remove any liquids before performing elec-
trosurgery.