Erbe ICC 200, Service Manual

Page: 116 / 266

1 TEST PROGRAMS AND ADJUSTMENTS 116
/ 266
Adjustment of activation
and instrument detection
MIC board 30128-200 (V4.0)
List of units involved
ICC 350 MIC-MIEN V4.0 EE 10128-080
ICC 350 MIC-MIEN-DOKU V4.0 EE 10128-081
ICC 350 MIC-MIEN F V4.0 EE 10128-082
ICC 350 MIC-MIEN Int. V4.0 EE 10128-083
ICC 350 MIC-MIEN Int UL V4.0 EE 10128-215
ICC 350 MIC-MIEN Japan, 100V V4.0 EE 10128-310
Identification of the trimming potentiometers:
Trimming potentiometer TP 1: setting the instrument detection.
Trimming potentiometer TP 2: setting the activation detection.
Valid instrument number
Program no. Instrument Resistance Instrument no.
12 MIC TEM instrument EE 20191-275 10 Ohm ± 1 %; 0,2 W 1
13 MIEN Probe EE 20191-356 30 Ohm ± 1 %; 0,2 W 2
13 MIEN Probe EE 20191-357 30 Ohm ± 1 %; 0,2 W 2
The probes of no. 2 are only suitable for coagulation and CUT remains inhibited.
Display of instrument number
AUTO CUT AUTO COAG 1 AUTO COAG 2 AUTO BIPOLAR
Inr. Nr. p3 nd
Inr. Instrument recognized
No. Instrument number
p3 Power setting AUTO COAG 2
–nd Compressed air valve for needle control is actuated (only MIC)
nd Compressed air valve for needle control is not actuated (only MIC)