August 2012 – Ed.1.2
EQUITEL – E451 Technical manual
Page 12
In order to install the sheet metal box, we have to do an opening in the wall selected for mounting the
intercom E451. The box must be plastered at the surface level and placing it straight since when mounting it
there will be no more orientation possibilities.
The necessary cabling for the E451 Ethernet and power connections must be carried out through the holes in
the box intended for this purpose (
in Figure 9).
Once the power and Ethernet connections are made (explained in the points 1.6 and 1.11 espectively), the
equipment must be locked by screwing again the 4 anti-vandal screws as shown in Figure 10).
Figure 10.
Wall mounting
Ethernet network
and power cabling
8
