August 2012 – Ed.1.2
EQUITEL – E451 Technical manual
Page 23
Figure 16.
Working mode configuration. Mode P2P-SIP
To use the P2P-SIP mode (see Figure 16) it is necessary to configure the following parameters:
•
Authenticated User
: This is the extension assigned for the E451 intercom E451.
•
Destination Number
: This is the extension of the SIP device to which we wish to call by pressing the
user button.
•
Destination IP
: This is the SIP device IP address associated to the extension previously configured.
•
Destination Port
: This is the SIP port for the destination device. In case of communication between
the E451 using the mode P2P-SIP, this port must be 5060.
•
No Answer Timeout
: This is the time in seconds to finalize the call enquiry should the intended
recipient not answer. Values from 10 to 300 seconds.
•
Auto-Answer:
When this option is activated, E451 answers automatically after the configured time
has expired (values from 1 to 180 seconds).
Once the configuration is established, the changes must be stored by clicking the button
Apply Changes
,
located at the bottom of the page, and afterwards we must reboot the unit.