August 2012 – Ed.1.2
EQUITEL – E451 Technical manual
Page 20
The access menu to the different server pages is in the left side:
•
Home
: Information about the system.
•
Network
: Page for the network configuration.
•
Working Mode
: E451 can operate in any of the three operation modes we have formerly explained. In
this page it is selected the working mode.
•
Audio
: This page contains parameters relative to the audio configuration and load of prerecorded
message
•
Inputs/Outputs
: Activation of methods related with auxiliary inputs and outputs.
•
Security
: Allows changing the password to access the equipment.
•
Firmware
: Page where we can load remotely the new firmware supplied by EQUITEL.
•
Reset
: From this page it is possible to restore the factory default values and furthermore, reboot the
equipment from a remote site.
5.1
General information
The system general parameters are seen in the home page, shown in Figure 13.
Some data are fixed and cannot be modified, such as the serial number, firmware version or MAC address.
The unit identification name can be configured and afterwards we must click in the button
Apply Changes
to
save it.
5.2
Network configuration
In this page we show the current network configuration values, and the possibility to modify them.
The IP assignment is static by filling in the required fields, as shown in the following figure.
Once the corresponding parameters are established, the changes must be stored by clicking the button
Apply
Changes
, located at the bottom of the page.
Clicking this button implies the reboot of the system. After that, we can access again the web server using the
new IP address in the browser.
