June 2015 - Ed.2.1
Audio over IP decoders E411, E413, E415 & E417 technical manual
Page 40
5.3.6.
System info and configuration
In this screen there are three options that can be selected with the lower right
button and validated with the lower left one:
"Nivel Luz" (Light Level): Allows to change the level of the backlight of
the display.
"Versión" (Version): Shows the firmware version of the TMH60ENA
Reset: Reboots the controller.
The upper left button returns to the default screen.
BackLight level change
You can choose the backlight level of the controller from 1 (lowest) to 9 (highest).
The level is changed with the right buttons and validated with the lower left one.
The upper left button discards the change and return to the info/configuration
screen.
The backlight is switched off after a time there is no activity in the controller and
automatically switched on (at the configured level) when the user pushes a
button or there is any change in the information shown.
5.3.7.
Link error screen
If for any reason the data communication between the controller and the E41x
decoder fails, the TMH60ENA will show this screen.
In this case, please, revise the data wire.
If this doesn't solve the problem, contact us at [email protected] and send the
error number that appears in the screen.
