June 2015 - Ed.2.1
Audio over IP decoders E411, E413, E415 & E417 technical manual
Page 15
Once the credentials are entered correctly, the initial page is shown:
Figure 10: Web server initial page
At the top of the page are shown the device model, a button to change between control and configuration
mode, and the icons to change the language.
Initially no source is configured. So, the only information shown on this page is the device's MAC, serial
number and firmware version.
The upper button lets you toggle between the two working modes:
Control Mode: When the device is properly configured, this page shows its status and allows its
control (i.e. background music channel selection and volume control). See section 4.3 .
Configuration Mode: To configure the device parameters. See section 4.2.
Mode change
Language change