Equitel E411 Technical Manual Download Page 39

Page: 39 / 49

June 2015 - Ed.2.1

Audio over IP decoders E411, E413, E415 & E417 technical manual

Page 35

4.2.5.

Firmware updates and device reset

The page labeled as “Fw / Reset” allows to perform three actions:

Figure 30: Update and Reset page

Reboot device

Press the button to reset the device remotely. After a few seconds, the web server will connect again with
the device.

Restore default values

Pressing the button, the device configuration is reset to its default values, except the network settings.

Firmware upgrade

At EQUITEL we are continuously working in the improvement of our products. As a result of this process,
new firmware versions are published.

The update process is very simple, just select the firmware file you have received or downloaded

pressing the button with the folder icon and then press the 'Save' button.

The update process will take a few minutes, after which the device will restart automatically.

Normally the configuration is maintained after the upgrade. If not, it will be specified in the firmware
publishing.

NOTE: After firmware upgrade is completed, a message will be shown to close the browser. It is
compulsory to do so before attempting to reconnect to the web server.

Latest firmware versions can be downloaded from the website www.ena.equitel.es

Summary of Contents for E411


















































Search results

Summary of Contents for E411

Reviews:

Related manuals for E411

Brands by name

Popular brands

Equitel E411, Technical Manual

Search results

Summary of Contents for E411

Reviews:

Related manuals for E411

Brands by name

Popular brands