51
(date and time will switch on the display) with the (
+
)
and (
-
) buttons.
• Confirm setting with the OK button.
16.3 Switching nominal/actual temperature (S-A)
In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
the display setting from nominal to actual temperature.
• Open the configuration menu by pressing the menu button.
• Select the (
S-A
) menu item with the (
+
) and (
-
) buttons
and confirm with the OK button.
• Now set the format you want to show on the display („
SEt
“
for the nominal temperature and „
ACt
“ for the actual tem-
perature) with the (
+
) and (
-
) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected, the display will display
„SEt“ for 5 seconds on change of the nominal temperature
(or on change of mode). Afterwards, the display automati-
cally changes back to actual temperature.
16.4 Comfort and reduced temperature ( )
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using MAX! without Cube, the comfort and redu-
ced temperature can be changed via corresponding but-
tons as follows:
Summary of Contents for MAX! Radiator Thermostat+
