eQ-3 MAX! Radiator Thermostat+, Operating Manual

Page: 163 / 180

43
• The antenna symbol appears in the display and the MAX!
Wall The appears in the MAX! software.
• In to software, go to „Next“ to give the device a name
and assign it to a room.
• The MAX! Wall The is now integrated into the
system and can be configured for each room via the
MAX! software.
As soon as the MAX! Wall The has been
taught in to the MAX! Cube, all data such as date,
time or week programme are transmitted to it via ra-
dio connection.
If the MAX! Wall The has already been con-
figured with a MAX! Wall The, a factory re-
set must be performed prior to teaching-in for the
first time to a MAX! Cube. All settings incl. the week
programmes will be lost.
MAX! Room Solution
In the MAX! Room Solution, you can control up to
8 MAX! Radiator The and 8 MAX! Window
Sensors via the MAX! Wall The. Therefore,
all devices are taught-in to the MAX! Wall Thermo-
stat+ directly. These then take over the settings of
the MAX! Wall The (e.g. mode, tempera-
ture, week programme).
To teach in, proceed as follows:
• Start by switching the teach-in partner (e.g. the MAX!
Radiator The) to teach-in mode.
• Activate the teach-in mode of the MAX! Wall Thermos-
tat+. Press and hold down the OK-Button.