67
10. Reset
The MAX! Radiator The can be reset to the initial
state manually. Restoring the initial state deletes all set-
tings and information about taught-in devices.
Before resetting the MAX! Radiator The,
please first delete the device from the local MAX!
software when using the installation with a MAX!
Cube.
•
First remove the batteries from the MAX! Radiator Ther-
.
•
Now wait for 60 seconds.
•
Press and hold down the three buttons (Auto/Manu, Boost
and ( )) while you re-insert the batteries.
•
Once the factory settings have been restored success-
fully, “rES” is displayed.
11. Operating modes (Auto/Manu/Holiday)
To switch between operating modes, press and immedi-
ately release the Auto/Manu button (the operating modes
only become available for selection once installation is
complete).
•
Auto
: Week programme - automatic temperature reg-
ulation in accordance with the time profile saved (heat/
reduce).
•
Manu
: Manual operation - the temperature set manually
using the handwheel is maintained permanently.
•
Holiday (
):
In holiday mode, the set temperature is
maintained up to an end time, at which point the device
switches to automatic mode.
Summary of Contents for MAX! Radiator Thermostat+
