23
7.2. Teaching in on MAX! components
(without a MAX! cube)
You can also teach the MAX! window sensor in on other
MAX! components (without a MAX! cube).
•
Start by switching the teach-in partner (e.g. the MAX!
wall thermostat) to teach-in mode.
•
To activate teach-in mode on the MAX! window sensor,
press and hold down the teach-in button on the electro-
nic unit (see page 22). The device LED starts to flash.
•
Successful teaching in of the MAX! window sensor is
confirmed by the LED lighting up once.
•
Finally, place the cap on the electronic unit.
To initialise the window sensor, open and close the
window to which the MAX! window sensor is moun-
ted once.
The wireless window sensor can only be taught in
on a maximum of one MAX! cube or one MAX! wall
thermostat.
8. Teach-out/Reset
The MAX! window sensor can be reset to the initial state
manually. Restoring the initial state deletes all settings and
information about taught-in devices.
•
First remove the batteries from the electronic unit.
•
Wait 60 seconds.
•
Hold down the teach-in button and at the same time re-
insert the batteries.
•
Press and hold down the teach-in button until the LED
Summary of Contents for MAX! Radiator Thermostat+
