QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
8
The
WAN Settings
page contains of the following
components:
The
Assign automatically via DHCP
radio button selection
switches to automatic retrieval of the WAN IP address from a
DHCP server at the ISP/uplink.
Please Note:
DHCP referred to here is the one running on
the provider’s side and not the QuadroCS’s personal DHCP
server.
The
Assign Manually
radio button switches to the manual
adjustment of IP settings. This selection requests the
following parameters:
IP Address
requires the IP address for the Quadro WAN
interface.
Subnet Mask
requires the subnet mask for the Quadro
device WAN interface.
Default Gateway
requires the IP address of the router all
packets are sent to, for example the IP address of the
provider's router.
Fig.0-6: System Configuration Wizard – WAN IP Configuration page
Status
The system status window displays non-editable tables providing extensive status information about QuadroCS:
General Information
,
Network
Status
,
Memory Status
and
SIP Registration Status
. The links on this page lead to device transfer statistics, user mailboxes and supplementary
services configuration pages.
The
System Status
page consists of several tables providing system information.
General Information
The
General Information
table includes the following
information:
The
Uptime duration
since QuadroCS's last reboot.
The
Device Hostname
of QuadroCS.
The
Conference Server Operating System
version
.
The
Application Software
shows
QuadroCS's
software and
file system versions.
The
Boot Loader
version.
The
DSP Software
version and the date of build.
Fig. II-7: Quadro Status – General Information page
