QuadroCS Manual II: Administrator's Guide
Administrator's Menus
Quadro
CS
(SW Version 3.0.x)
16
Mail Settings
The
System Mail Settings
page gives the possibility of automatically sending warnings about the board status or other problems to the
administrator.
System events that require email notification are selected on the
Events
page. The system mail functionality must be enabled and the
SMTP server needs to be configured for voice message transmission to the extension user’s mailing account.
Enable
enables the system for sending mails and transmitting
voice messages to the extension user’s mailbox.
SMTP Host
requires the SMTP host IP address or domain
name. The SMTP host needs to be configured to enable
voice message transmission.
Mail Sender Address
text field requires the source address
for the Quadro notification emails. The email address defined
here should be an existing valid email address registered on
the selected SMTP server or should have permission to use
that SMTP server for emails transmission.
Mail Recipient Address
requires an active email address.
The e-mail recipient here can be a Quadro administrator or
someone responsible for network and system problems.
Enable SMTP Authentication
checkboxmust be selected if
the specified SMTP server requires an authentication. In this
case, authentication
User Name
and
Password
configured
on the SMTP server should be defined in the corresponding
text fields.
Send Test Mail
is used to initiate a test e-mail transmission.
This button will be enabled if correct values have been
submitted and saved on this page.
Fig. II-22: System Mail Settings page
Firmware Update
This window allows the software of QuadroCS to be updated by installing new firmware. Customers registered at Epygi will get notification of new
firmware and will be able to download it from the Epygi Technical Support WEB page.
QuadroCS is provided with a battery. If the battery is low or simply absent the “There is no battery or voltage is low” warning is displayed.
Please Note:
Installing new firmware will last about 3 minutes.
During this time, QuadroCS won't operate, neither telephony
nor Internet access. The firmware update will cause the loss of
the following data:
•
DHCP leases
•
Call Statistics
•
All
pending
events
The following main processes will be stopped during the
firmware update and will be restarted afterward:
•
Voice
Software
•
Network
Time
Protocol
Daemon
•
Network
Interface
Statistic
Daemon
•
Dynamic
DNS
Daemon
Next
button will move to the second page of Firmware Update
to select the image file.
Fig. II-23: Firmware Update page 1
